Criteria for Passports

An application for issue of a passport under the Passports Act, 1967 may be made to a Passport Issuing Authority for which the applicant must fulfill the following criteria:

(i) that the applicant is a citizen of India;

(ii) that the applicant has not been, at any time during the period of five years immediately preceding the date of his application, been convicted by a court in India for any offence involving moral turpitude and sentenced in respect thereof to imprisonment for not less than two years;

(iii) that proceedings in respect of an offence alleged to have been committed by the applicant are not pending before a criminal court in India;

(iv) that a warrant or summons for the appearance, or a warrant for the arrest, of the applicant has not been issued by a court under any law for the time being in force or that an order prohibiting the departure from India of the applicant has not been made by any such court; and

(v) that the applicant has never applied for/ or been granted political asylum by any foreign country.

The pre-printed portion of the passport is in both Hindi and English languages. The personal details of individuals in the passport are presently printed in the English language only. It has been decided to print personal details of individuals in passports both in Hindi and English languages.

The total number of Regional Passport Offices in the country is 38 including two at Ahmedabad and Surat in Gujarat.

The Government has implemented with effect from 24 June, 2017 a new scheme under which senior citizens of the age of 60 years and above and minor children upto the age of eight years would be given a discount of 10 per cent on the applicable passport fee on fresh application for passports.

The Government has opened 14 Passport Seva Kendras (PSK) since May 2014 which includes all the States in the North East of India. Two more PSK at Siliguri in West Bengal and at Sholapur in Maharashtra are scheduled to be inaugurated shortly to take the total number of PSK in the country to 93.

The Ministry of External Affairs in association with the Department of Posts has decided to open Passport Offices at the Head Post Offices (HPO) in the country called ‘Post Office Passport Seva Kendra’ (POPSK). The Government has announced the opening of 235 POPSK in two phases – 86 in Phase-I and 149 in Phase-II. 55 POPSK out of the 86 announced in Phase-I are functional as on 21 July, 2017. With the addition of 235 POPSK, the total number of Passport Seva Kendras including POPSK to have been set-up since May 2014 would be 251.

There will be 93 PSK and 235 POPSK after the operationalization of all the PSK and POPSK announced in Phases I and II. There will be 328 Passport Seva Kendras in the country. The Government thereafter intends to open POPSK in the HPO in the country in such a manner that there is a Passport Seva Kendra available within a radius of 50 km of every HPO.

This information was given by Shri Gen. (Dr.) V.K. Singh (Retd), the Minister of State for External Affairs, in a written reply to a question in Lok Sabha, today.

Innovation Level

The Department of Science & Technology has launched a new programme ‘National Initiative for Developing & Harnessing Innovations (NIDHI)’ last year which covers the entire value chain of innovations starting from idea to commercialization.

To promote innovation focused start-ups some of the key initiatives taken by the government are:

1. National Institution for Transforming India (NITI) Aayog is implementing Atal Innovation Mission (AIM) for promoting Incubators and Tinkering Labs.

2. Ministry of Human Resource Development (MHRD) and Department of Science and Technology (DST) have joined hands to promote Research Parks in the country.

3. Department of Industrial Policy and Promotion (DIPP) in association with Small Industries Development Bank of India (SIDBI) has set up a Rs.10,000 crore Fund to invest in Venture Capital Funds to promote innovations and start-ups.

4. Ministry of Micro Small and Medium Industries has a programme to setup incubators in the Agriculture sector, under the ASPIRE (‘A Scheme For Promoting Innovation, Rural Industry & Entrepreneurship’) programme.

5. Department of Bio-Technology has a programme to promote incubators in the Bio-tech sector under the Biotechnology Industry Research Assistance Council (BIRAC) programme.

6. MHRD has also launched a Smart India Hackathon for involving Engineering students to provide solutions to problems faced by Government Departments.

In short there is a concerted effort by the government to promote innovation for addressing the problems and challenges faced by the country.

This information was given by Minister of State for Ministry of Science & Technology and Ministry of Earth Sciences Shri Y.S.Chowdary in a written reply to a question in Lok Sabha today.

Benefits of Research

Government has taken numerous steps to ensure that the benefits of research by various scientific institutions and universities in the country reach to common man and also for commercialization of developed technology:

• The Department of Science & Technology (DST) has launched many programs for well-being of the common man across the country, particularly those living in rural areas and the under-privileged sections of society such as Long Term Core Support through Technological Advancement for Rural Areas (TARA) scheme, Technological Intervention for Addressing Societal Needs (TIASN), Technology Application for Livelihood Improvement of Scheduled Caste Population (TALIM-SC), Technology Intervention Programme for Disabled & Elderly Population, People & Protected Programme for Tribal Communities living around Protected Areas to address livelihoods and conservation issues. Besides, Women Technology Parks are created, wherein academia and field based S&T agencies/organizations identify local challenges and address these through appropriate S&T interventions. Department has also established Technology Business Incubators in 113 scientific institutions and universities to help commercialization of Technologies and innovations. DST is also implementing bilateral collaborative industrial R&D programs with several countries,which have participation from industry, enterprises, academia and R&D institutions from both sides, to develop prototypes, products or processes with commercial potential.

• In addition, the Ministry, through the Technology Development Board (TDB), Biotechnology Industry Research Assistance Council (BIRAC), Science and Engineering Research Board (SERB) and other extramural programmes also supports commercialization of developed technology.

• The Council of Scientific and Industrial Research (CSIR) operated project activities under ‘CSIR-800’ program areaiming at bringing in desired S&T interventions for improving quality of life of common people at base of the economic pyramid. The efforts include, a food processing unit set up at CSIR-Centre for High Altitude Biology (CSIR-CeHAB) in the remote tribal region of Lahaul and Spiti;Empowering the selected Women self-help groups in Manipur;Training and skill development techniques to terracotta pottery rural artisans across various states; Arsenic removal technology and de-floridation plants & variety of other water purification plants for community/ domestic use in Rural Areas for common people; Popularizing mushroom technology through transfer and training to benefit rural women in North East Sates; Medicinal & Aromatic plants (MAPs) and other related technologies for rural development in Jammu & Kashmir region and Western Himalayan region. CSIR has also started Samadhan Kendra, a Rural Information Technology centre to provide details about the agriculture.

• Ministry of New and Renewable Energy (MNRE) also supports R & D programs with a provision for financial assistance of up to 50% of the project cost for the projects that involve partnership with industry / civil society. Various renewable energy systems supported by them such as biogas plants, solar lights, solar dryers, etc. have reached the remotest part of the country and are being used by people for their energy needs.

Technology Information Forecasting and Assessment Council (TIFAC), DST through Patent Facilitating Cell (PFC) has been regularly organizing training programmes for scientists and industrial sectors in collaboration with Defence Research and Development Organization (DRDO), Indian Council for Agricultural Research (ICAR), Indian Institute of Corporate Affairs (IICA), Manesar, United Nations Industrial Development Organization (UNIDO) and Technology Development Board (TDB), New Delhi. PFC-TIFAC is also implementing Women Scientist Scheme (WOS-C popularly known as KIRAN-IPR)revamped by Government in 2015. PFC-TIFAC is also conducting one day workshops with special focus on patents.

The Government has taken several steps for protection of Intellectual property and announced the National IPR Policy on May 12, 2016 (Department of Industrial Policy and Promotion (DIPP), Ministry of Commerce and Industry as the Nodal Ministry). The policy in total has 203 action points. Cell for IPR Promotion and Management (CIPAM) has been created to implement the objectives of the National IPR Policy. New Commercial Courts have been created and also in order to strengthen the enforcement mechanism, various training programs on enforcement of IPRs for police officials have been organized.India’s first ever Technology and Innovation Support Center (TISC) has been established in association with World Intellectual Property Organization (WIPO) in PSCST, Punjab to take forward commercialization of IPs.

Technology Information Forecasting and Assessment Council (TIFAC), DST is working to improve IPR output of national research laboratories, universities, technology institutions and other researchers by encouraging and facilitating the acquisition of Intellectual Property Rights by them.

CSIR adopted a centralized operation for its IPR protection with its Innovation Protection Unit (IPU). IPU protects intellectual property rights at national and international level for the results of important R&D carried out in the various CSIR Laboratories and schemes.

This information was given by Minister of State for Ministry of Science & Technology and Ministry of Earth Sciences Shri Y.S.Chowdary in a written reply to a question in Lok Sabha today.

Smart Stations

A Memorandum of Understanding (MoU) has been entered into between Ministry of Railways (MoR) and Ministry of Urban Development (MoUD) for integrated planning of railway stations in the cities included in the ‘SMART Cities’ and Atal Mission for Rejuvenation and Urban Transformation (AMRUT) scheme. This would lead to an integrated public transit hub around the railway stations and encourage Transit Oriented Development.

An MoU between Rail Land Development Authority (RLDA) and National Buildings Construction Corporation Limited (NBCC) has been signed on 30.06.2017. In the first phase, Ten stations viz. Tirupati (Andhra Pradesh), Delhi Sarai Rohilla (Delhi), Nellore (Andhra Pradesh), Madgaon (Goa), Lucknow (Uttar Pradesh), Gomtinagar (Uttar Pradesh), Kota (Rajasthan), Thane New (Maharashtra), Ernakulam Junction (Kerala) and Puducherry (U.T.) have been identified for redevelopment as a part of ‘SMART Cities’ scheme. Ambala Cantt Railway Station is not identified for redevelopment in the first phase. A study has been conducted by French Railway (SNCF) for Ambala station redevelopment and the final reports have been submitted by them. The findings of the report have been incorporated while preparing the bid documents for Ambala station redevelopment, for the 2nd phase.

As station redevelopment projects are complex in nature and require detailed techno-economic feasibility studies, no time frame can be set for their completion.

The cost of station redevelopment is to be met by leveraging commercial development of vacant land/air space in and around the station. Therefore, railway funds are not required for station redevelopment projects. Such projects shall generally be cost neutral to Railways.

This Press Release is based on the information given by the Minister of State for Railways Shri Rajen Gohain in a written reply to a question in Lok Sabha on 26.07.2017 (Wednesday).

Speed of Trains

With a view to increasing speed of trains in Indian Railways, ‘Mission Raftaar’ was announced in the Railway Budget 2016-17.

The mission envisages a target of doubling of average speed of freight trains and increasing the average speed of all non-suburban passenger trains by 25 kmph in the next 5 years.

Action Plan for improving mobility and increasing average speed includes removal of speed restrictions, construction of road over bridges (ROBs) and road under bridges (RUBs), right powering of trains, introduction of twin-pipe in wagons, replacement of conventional trains by Main Line Electric Multiple Unit (MEMU) trains and Diesel Electric Multiple Unit (DEMU) trains. In addition, two projects for raising of speed to 160/200 kmph on existing corridors of New Delhi-Mumbai route (including Vadodara-Ahmedabad) covering 1483 route km and New Delhi-Howrah route (including Kanpur-Lucknow) covering 1525 route kms have been included in the Pink Book of 2017-18.

Improvement in speed, as and when realised on a sustained basis, can improve the running time and its impact on punctual running of trains will be indirect through additional recovery time that can be provided. It is not possible to assess/quantify such effects at this stage.

Most of the activities in the action plan are ongoing activities. The estimated cost of two projects viz. for raising of speed to 160/200 kmph on existing corridors of New Delhi-Mumbai route (including Vadodara-Ahmedabad) and New Delhi-Howrah route (including Kanpur-Lucknow) is ₹ 18,163 crore.

This Press Release is based on the information given by the Minister of State for Railways Shri Rajen Gohain in a written reply to a question in Lok Sabha on 26.07.2017 (Wednesday).

NEET Exam

The provisions for age limit and number of attempts were decided in consultation with Medical Council of India (MCI) and Central board of Secondary Education (CBSE). Accordingly, these were included in the National Eligibility cum Entrance Test (NEET) Bulletin 2017 prepared and issued by CBSE. It was further clarified that the three attempts will be counted from 2017 onwards. The Hon’ble Supreme Court in the matter of Rai Sabyasachi and anr Vs. Union of India and Ors in WP (C) 99 of 2017 ordered to remove the age limit restriction for NEET-2017. The matter was further heard by the Hon’ble Supreme Court of India dt. 10.07.2017 and decided that as far as the present year is concerned, nothing survives to be adjudicated in the Writ petitions and they are accordingly, disposed off.

In National Eligibility and Entrance Test- Under Graduate (NEET-UG), from the year 2017, three attempts have been fixed. In Joint Entrance Examination (JEE) Main too, there are three attempts.

Section 10D of Indian Medical Council Act, 1956 prescribes conducting of a uniform entrance examination namely National Eligibility cum Entrance Test (NEET) for admission to all medical educational institutions at undergraduate and post-graduate level.
The private medical educational institutions have a management quota which is decided by way of signing Memorandum of Understanding (MoU) between the respective State and the Institution. Admission to management quote is also through NEET and common counselling.

This information was given by the Minister of State (HRD), Shri Upendra Kushwaha today in a written reply to a Lok Sabha question.

Web application for free legal services to prisoners

As per information provided by the Ministry of Law and Justice, Department of Justice, the National Legal Services Authority (NALSA) has developed and launched a web application in New Delhi on 29.6.2017 for legal services to under trial prisoners/convicts. The web application facilitates to know the unrepresented under trial prisoners, and the Legal Services Institutions can provide them free legal services. The under trial prisoners or their relatives can also send their request to the Legal Services Institutions for getting free legal aid.

This was stated by the Minister of State for Home Affairs, Shri Hansraj Gangaram Ahir in a written reply to question by Adv. Joice George in the Lok Sabha today.

PM expresses grief on demise of Professor Yash Pal

The Prime Minister Shri Narendra Modi has expressed grief on the demise of Indian scientist and educationist Professor Yash Pal.

” Pained by Professor Yash Pal’s demise. We have lost a brilliant scientist & academician who made a lasting contribution to Indian education.

Interacted with Professor Yash Pal extensively on many occasions including the National Children’s Science Congress in Gujarat in 2009.” the Prime Minister said.

The Prime Minister also shared some pictures of him with Professor Yash Pal from National Children’s Science Congress 2009.

Profile of President Shri Ram Nath Kovind

A lawyer, veteran political representative and long-time advocate of egalitarianism and integrity in Indian public life and society, Shri Ram Nath Kovind was born on October 1, 1945, in Paraunkh, near Kanpur, Uttar Pradesh. His parents were Shri Maiku Lal and Smt Kalawati.

Before assuming charge of the office of the 14th President of India on July 25, 2017, Shri Kovind served as the 36th Governor of the state of Bihar from August 16, 2015, to June 20, 2017.

Educational and Professional Background

Shri Kovind completed his school education in Kanpur and obtained the degrees of B.Com and L.L.B. from Kanpur University. In 1971, he enrolled as an Advocate with the Bar Council of Delhi.

Shri Kovind was Union Government Advocate in the Delhi High Court from 1977 to 1979 and Union Government Standing Counsel in the Supreme Court from 1980 to 1993. He became Advocate-on-Record of the Supreme Court of India in 1978. He practised at the Delhi High Court and Supreme Court for 16 years till 1993.

Parliamentary and Public Life

Shri Kovind was elected as a member of the Rajya Sabha from Uttar Pradesh in April 1994. He served for two consecutive terms of six years each till March 2006. Shri Kovind served on various Parliamentary Committees like Parliamentary Committee on Welfare of Scheduled Castes/Tribes; Parliamentary Committee on Home Affairs; Parliamentary Committee on Petroleum and Natural Gas; Parliamentary Committee on Social Justice and Empowerment; and Parliamentary Committee on Law and Justice. He was Chairman of the Rajya Sabha House Committee.

Shri Kovind also served as Member of the Board of Management of the Dr B.R Ambedkar University, Lucknow, and Member of the Board of Governors of the Indian Institute of Management, Kolkata. He was part of the Indian delegation at the United Nations and addressed the United Nations General Assembly in October 2002.

Positions Held

2015-17: Governor of Bihar

1994-2006: Member of the Rajya Sabha, representing the state of Uttar Pradesh

1971-75 and 1981: General Secretary, Akhil Bharatiya Koli Samaj

1977-79: Union Government Advocate at the Delhi High Court

1982-84: Union Government Junior Counsel in the Supreme Court

Personal Details

Shri Kovind married Smt Savita Kovind on May 30, 1974. They have a son, Shri Prashant Kumar, and a daughter, Miss Swati. An avid reader, the President has keen interest in reading books on politics and social change, law and history, and religion.

During his long public career, Shri Kovind has travelled widely across the country. He has also visited Thailand, Nepal, Pakistan, Singapore, Germany, Switzerland, France, the United Kingdom and the United States in his capacity as a Member of Parliament.

Dragonfly brains predict the path of their prey

New research from Australia and Sweden has shown how a dragonfly’s brain anticipates the movement of its prey, enabling it to hunt successfully. This knowledge could lead to innovations in fields such as robot vision.

An article published today in the journal eLife by researchers at the University of Adelaide and Lund University has offered more insights into the complexity of brain processing in dragonflies than has previously been understood.

“Until now, the international research community has primarily considered the capabilities of mammals, such as humans, for investigating how animals can predict where a moving object will be in the near future,” says project partner Dr Steven Wiederman from the University of Adelaide’s Adelaide Medical School.

“Understandably, mammals in many ways are more complex organisms than insects, but with each discovery we’re finding that dragonflies have keen visual and neural processes that could be ideal for translating into technological advances,” he says.

The Swedish-Australian collaboration resulted in the discovery of brain cells (neurons) in the dragonfly Hemicordulia that enables them to predictively pursue and catch their flying prey. These neurons make it possible to focus on a small object that moves over a complex background, similarly to how humans can track and catch a ball, even when that ball is moving against the backdrop of a cheering crowd.

Professor David O’Carroll, Professor of Biology at Lund University, says: “The dragonfly neurons can make a selection of a single target from the mass of visual information that the brain receives, such as the motion of another insect, and then predict its direction and future location. The dragonfly, like humans, makes this assessment based on the path along which the object moves.

“In other words, the dragonfly does something very similar to what we do when we track a ball in motion. Despite major differences in the complexity of the brain, evolution has led to the insect using its brain for advanced visual processes that are usually only considered in mammals.”

University of Adelaide PhD student Joseph Fabian and other team members were able to record target-detecting neurons in the dragonfly brain. These neurons increased their responses in a small ‘focus’ area just in front of the location of a moving object being tracked. If the object then disappeared from the field of vision, the focus spread forward over time, allowing the brain to predict where the target was most likely to reappear. The neuronal prediction was based on the previous path along which the prey had flown.

“This is an exciting discovery, and it aids our understanding of how single neurons make advanced predictions based on past history,” Dr Wiederman says.

“Our team is convinced that these results will have practical applications, especially in the development of artificial control and vision systems, such as self-steering vehicles and bionic vision.”

Magnetic quantum objects in a ‘nano egg-box’

Magnetic quantum objects in superconductors, so-called “fluxons”, are particularly suitable for the storage and processing of data bits. Computer circuits based on fluxons could be operated with significantly higher speed and, at the same time, produce much less heat dissipation. Physicists around Wolfgang Lang at the University of Vienna and their colleagues at the Johannes-Kepler-University Linz have now succeeded in producing a “quantum egg-box” with a novel and simple method. They realized a stable and regular arrangement of hundreds of thousands of fluxons – a groundbreaking progress for circuits based on fluxons. The results appear in the new journal Physical Review Applied of the renowned “American Physical Society”.

Speeding up data processing in computers goes hand in hand with a greater heat generation, which limits the performance of fast computers. Researchers have therefore long been trying to develop digital circuits based on superconductors – those puzzling materials that can transport electricity completely without loss when cooled below a certain critical temperature.

Magnetic quantum objects in superconductors

Inside a superconductor, a magnetic field can exist only in small quantized pieces, the fluxons. These are particularly suitable for the storage and processing of data bits. In a homogeneous superconductor, the fluxons are arranged in a hexagonal lattice. Using modern nanotechnology, researchers at the University of Vienna and the Johannes-Kepler-University Linz have now succeeded in building artificial traps for fluxons. By means of these traps the fluxons are forced into a predefined formation.

The importance of the non-equilibrium

Until now, the fluxons could only be observed in a thermodynamic equilibrium, i.e., in a uniform arrangement. “If we try to stack two eggs on top of each other in an egg-box and leave the adjacent pit empty, the egg would quickly roll down and we end up in the equilibrium state with exactly one egg in each pit,” explains Wolfgang Lang from the University of Vienna. From the viewpoint of data processing, however, the fully-filled egg-box contains little information and is therefore useless. It would be much more useful to place the eggs in a predefined pattern. In such a way, for example, the QR code, recognized by smartphones, could be realized in an egg-box – obviously a large amount of information.

At the nanoscale, the researchers have now made a major step forward in this direction by demonstrating for the first time a stable non-equilibrium state of fluxons in an array of more than 180,000 artificial traps. Depending on the external magnetic field, the fluxons arrange themselves in terraced zones, in which each trap either captures no fluxon, exactly one, or even several fluxons. “Even after days, we have observed precisely the same arrangement of fluxons – a long-term stability that is rather surprising for a quantum system,” says Georg Zechner of the University of Vienna, the lead author of the study.

Nanopatterning of superconductors by ion beams

These research results were enabled by a new method, developed by the physicists in Linz and Vienna together with the Vienna-based high-tech company IMS Nanofabrication AG. “Masked ion-beam irradiation allows for the fabrication of nanostructures in superconductors in a single step. It can be applied time-efficiently to large areas, can be ramped-up to an industrial scale and does not require any chemical processes,” emphasizes Johannes D. Pedarnig of the Institute of Applied Physics at the Johannes-Kepler-University Linz. Depending on the mask used, virtually any desired structure can be patterned into the superconductor. The scientists are now planning further experiments on more sophisticated nanostructures, which should demonstrate the systematic transfer of fluxons from one trap to the next. This could be another pioneering step towards the development of fast computer circuits based on fluxons.

Study explains link between academic performance and violence

Numerous studies have shown a relationship between high-crime communities and the academic performance of children who live within them.

Now, new Northwestern University research suggests sleep disruption following violent incidents and increased amounts of the stress hormone cortisol offer a biological explanation for why children who live in neighborhoods with higher rates of violent crime struggle more in school.

“Both sleep and cortisol are connected to the ability to learn and perform academic tasks,” said study lead author Jenni Heissel, who recently received her Ph.D. in human development and social policy from the School of Education and Social Policy. “Our study identifies a pathway by which violent crime may get under the skin to affect academic performance.”

The study, conducted by researchers at Northwestern, New York University and DePaul University, found violent crime changes the sleep patterns of children living nearby, which increases the amount of cortisol, the stress hormone, in the children’s bodies the day immediately following the violent incident. Both sleep disruption and increased cortisol have demonstrated a negative impact on academic performance.

“Past research has found a link between violent crimes and performance on tests, but researchers haven’t been able to say why crime affects academic performance,” Heissel said.

Researchers tracked the sleep and stress hormones of 82 young people, ages 11 to 18, in a large Midwestern city who attended racially, ethnically and socioeconomically diverse public schools.

The students filled out daily diaries over four days, wore activity-tracking watches that measured sleep and had their saliva tested three times a day to check for cortisol. Researchers also collected information on violent crimes reported to police in the city during the study, including which students had violent crimes occur in their neighborhoods.

Researchers compared the students’ sleep on nights following a violent crime to their sleep on nights when there were no violent crimes committed nearby. They also compared students’ cortisol on days following a violent crime to their stress hormones on days when there were no violent crimes committed nearby.

Among the findings: Students went to sleep later on nights when a violent crime occurred near their home, often resulting in fewer total hours of sleep. In addition, the increase in youth’s cortisol levels the morning after a nearby crime occurred the day before was larger than on mornings following no crime the previous day, a pattern that previous research suggests might reflect the body’s anticipation of more stress the day following a crime. The changes in sleep and cortisol were largest when the crime committed the previous day was homicide, they were moderate for assault and sexual assault and nonexistent for robbery.

“The results of our research have several implications for policy,” suggested study co-author Emma Adam, professor of human development and social policy at SESP.

“They provide a link between violent crime and several mechanisms known to affect cognitive performance. They also may help explain why some low-income youth living in high-risk neighborhoods sleep less than higher-income youth. And they suggest that although programs to reduce violent crime may be the best policy solution, schools could also provide students with programs or methods to cope with their response to stressful events like nearby violent crimes.”

President Mukherjee Remembers Life as MP at Farewell, Thanks Modi

The President of India, Mr. Pranab Mukherjee was given a grand farewell at Central Hall of the Parliament on Sunday, July 23, 2017, where he remebred fondly his 37 years as a member of parliament before taking up the office of President.

The President said that as he retired from the Office of the President of the Republic, his association with the Parliament also comes to an end. He will no longer be a part of the Parliament of India. He stated he was leaving with a sense of fulfilment and happiness of having served the people of this great country through this institution- as their humble servant.

Speaking on the occasion, the President said that for 37 years he served as a Member of Lok Sabha and Rajya Sabha. Listening to the stalwarts for hours and days in Parliament sitting in the Treasury or Opposition Benches, he felt one with the soul of this living institution. He understood the real value of debate, discussion and dissent.

He realized how disruption hurts the opposition more than the government as it denies them the opportunity to raise the concerns of the people. It was unfortunate that the parliamentary time devoted to legislation has been declining. With the heightened complexity of administration, legislation must be preceded by scrutiny and adequate discussion.

Scrutiny in committees is no substitute to open discussion on the floor of the House. When the Parliament fails to discharge its law-making role or enacts laws without discussion, it breaches the trust reposed in it by the people of this great country. He stated that the recent passage of Goods and Services Tax and its launch on 1st July is a shining example of co-operative federalism and speaks volumes for the maturity of Indian Parliament.

The President said that it was in July 2012 that his membership in Lok Sabha came to an end when he was declared as the 13th President of the Republic. Even though thirty-seven years of his life in Parliament came to an end on that day but he still continued to have a tenacious link with this institution, in fact he became an integral part of it, as President of Republic, as per the Constitution.

In these five years, his principal responsibility was to function as the guardian of the Constitution. As he had said on oath, he strived to preserve, protect and defend our Constitution, not just in word but also in spirit. In this task, he said he was greatly benefitted from the advice and co-operation extended by Prime Minister Modi at every step.

With passion and energy, he is driving transformational changes in the country. He would carry with him fond memories of their association and his warm and courteous behaviour, said the President.

Mr Ram Nath Kovind will take over as the next President of India on Monday.

Weather Warning – 20 to 24 July, 2017 -Karnataka to Witness Heavy Rains

India Meteorological Department has issued severe weather warning for 20th to 24thJuly, 2017 as below:

20JULY:

Heavy to very heavy rain at isolated places with extremely heavy falls very likely over Madhya Maharashtra and South Interior Karnataka.  Heavy   to very heavy  rain at a few places very likely over Konkan & Goa.

Heavy to very heavy rain at isolated places very likely over West Madhya Pradesh,  Gujarat State and Coastal Karnataka.

Heavy rain very likely at isolated places over Jammu & Kashmir, Himachal Pradesh,Uttarakhand, Punjab, Haryana, Chandigarh & Delhi,East Rajasthan, East Madhya  Pradesh, Vidarbha, Chhattisgarh,Jharkhand, West Bengal & Sikkim, Arunachal Pradesh, Assam & Meghalaya, Nagaland, Manipur, Mizoram &Tripura, North Interior  Karnataka, Tamilnadu & Pudducherry and Kerala.

21 JULY :♦

Heavy to very heavyrain at a few places with extremely heavy fallsat isolated places very likely over Gujarat State and Konkan & Goa.

Heavyto very heavyrain at isolated places very likely overEast Rajasthan, West Madhya Pradesh, Madhya Maharashtra,

Coastal Karnataka and South interior Karnatak.

Heavy rain very likely at isolated places over Himachal Pradesh, Uttarakhand, Jharkhand,  Gangetic  West  Bengal, Andaman & Nicobar Islands,

Nagaland, Manipur,  Mizoram & Tripura and Kerala.

22 July  :♦

Heavyto very heavy rain at a few placeswith extremely heavy falls at isolated places very likely over Gujarat State.

Heavy   to very heavy rain  at isolated   places very likely over Konkan & Goa.

Heavy rain at a few places   with extremely heavy falls at isolated places  very likely  over East Rajasthan.

Heavy rain very likelyat isolated places over Uttarakhand, West Rajasthan, West Madhya Pradesh, MadhyaMaharashtra,

Coastal Karnataka and south Interior Karnataka

23 July :♦

Heavy to  very heavy rain at isolated places  very  likely  over  Rajasthan  and  Gujarat  region.

Heavy rain very likely at isolated places over Saurashtra & Kutch, Konkan & Goa,  Coastal Karnataka and south Interior Karnataka.

24 July :♦

Heavy  to very heavy rain at isolated  places very likely over Rajasthan.

Heavy rain very likelyat isolated places over Jharkhand, Gangetic West Bengal, Konkan & Goa, Coastal Karnataka and south Interior Karnataka.

 

 

42 Indian Satellites Orbiting in Outer Space: Minister

At present, there are 42 Indian satellites operational in orbit, 15 of them for communication, 4 for meteorological observations, 14 for earth observations, 7 for navigation and 2 for space science purposes.

During FY 2016-17, the total revenue accrued from communication satellites through leasing of INSAT/ GSAT transponders is Rs. 746.68 crore.

With respect to earth observation satellites, the annual income from sale of remote sensing satellite data is Rs. 25.17 crores.

The data and value added services derived from earth observation, meteorological, communication & navigation satellites are used to support various applications like resource monitoring, weather forecasting, disaster management, location based services, including societal applications, informed Union Minister of State for Atomic Energy and Space, Dr Jitendra Singh in a written reply to a question in Rajya Sabha on Wednesday, July 20, 2017.

In current calendar year of 2017, Indian Space Research Organisation (ISRO) has launched 104 satellites, in a single launch, onboard PSLV-C37 on February 15, 2017 and 31 satellites, in a single launch, on-board PSLV-C38 on June 23, 2017, he had informed the Lok Sabha earlier on July 19, 2017.

These satellites include – Two Indian Cartosat-2 series satellites, two Indian Nano-Satellites, one Nano satellite from Indian University and 130 foreign satellites from 19 countries viz. Austria, Belgium, Chile, Czech Republic, France, Finland, Germany, Italy, Israel, Japan, Kazakhstan, Latvia, Lithuania, Slovakia, Switzerland, The Netherlands, UAE, UK and USA.

 

Miniskirt Row: Saudi Women’s Desire to be Free Remains Elusive

Saudi Arabian law was able to finally catch up with the miniskirt woman strolling on a village road with her midriff and legs exposed to a video grab that has gone viral. Though she was released later, the issue did not subside the outrage among women who cried wolf at targeting only women and not foreigners nor men.

Some Twitter users immediately pointed out double standards when Saudi men praised President Donald Trump’s wife Melania and daughter Ivanka who were part of the state visit last month but never worn veils.

The arrested woman, identified merely as Model Khulood, eschwed robes and a headscarf as per the Saudi law, which bars women from driving. However, most women took to their smartphones to defend the woman in miniskirt and questioned the male-oriented state laws.

“If she were a foreigner, they would sing about the beauty of her waist and the enchantment of her eyes. But because she is Saudi they are calling for her arrest,” tweeted one Fatima al-Issa while another pointed out how Saudi businessman Hasan al Jameel could kiss American pop icon Rihanna in a pool and the photograph was splashed in local media.

One Twitter user superimposed Ivanka Trump’s face on Model Khulood to show the difference in standards. “Everyone’s acting like a saint over just a skirt, while Hassan al-Jameel lay in Rihanna’s arms and no one said a thing. Everyone praises him for that while Saudi women are being insulted,” said one Shajan al-Qahtani.

But males are unmoved and defended the laws. “In France, the niqab (Burqa) is banned and women are fined if they wear it. In Saudi Arabia, wearing robes and modest clothing is part of the kingdom’s laws,” tweeted one activist. Here are some reactions on Twitter:

 

Team develops fast, cheap method to make supercapacitor electrodes

UW team develops fast, cheap method to make supercapacitor electrodes for electric cars, high-powered lasers.

Supercapacitors are an aptly named type of device that can store and deliver energy faster than conventional batteries. They are in high demand for applications including electric cars, wireless telecommunications and high-powered lasers.

But to realize these applications, supercapacitors need better electrodes, which connect the supercapacitor to the devices that depend on their energy. These electrodes need to be both quicker and cheaper to make on a large scale and also able to charge and discharge their electrical load faster. A team of engineers at the University of Washington thinks they’ve come up with a process for manufacturing supercapacitor electrode materials that will meet these stringent industrial and usage demands.

The researchers, led by UW assistant professor of materials science and engineering Peter Pauzauskie, published a paper on July 17 in the journal Nature Microsystems and Nanoengineering describing their supercapacitor electrode and the fast, inexpensive way they made it. Their novel method starts with carbon-rich materials that have been dried into a low-density matrix called an aerogel. This aerogel on its own can act as a crude electrode, but Pauzauskie’s team more than doubled its capacitance, which is its ability to store electric charge.

These inexpensive starting materials, coupled with a streamlined synthesis process, minimize two common barriers to industrial application: cost and speed.

“In industrial applications, time is money,” said Pauzauskie. “We can make the starting materials for these electrodes in hours, rather than weeks. And that can significantly drive down the synthesis cost for making high-performance supercapacitor electrodes.”

Effective supercapacitor electrodes are synthesized from carbon-rich materials that also have a high surface area. The latter requirement is critical because of the unique way supercapacitors store electric charge. While a conventional battery stores electric charges via the chemical reactions occurring within it, a supercapacitor instead stores and separates positive and negative charges directly on its surface.

“Supercapacitors can act much faster than batteries because they are not limited by the speed of the reaction or byproducts that can form,” said co-lead author Matthew Lim, a UW doctoral student in the Department of Materials Science & Engineering. “Supercapacitors can charge and discharge very quickly, which is why they’re great at delivering these ‘pulses’ of power.”

“They have great applications in settings where a battery on its own is too slow,” said fellow lead author Matthew Crane, a doctoral student in the UW Department of Chemical Engineering. “In moments where a battery is too slow to meet energy demands, a supercapacitor with a high surface area electrode could ‘kick’ in quickly and make up for the energy deficit.”

To get the high surface area for an efficient electrode, the team used aerogels. These are wet, gel-like substances that have gone through a special treatment of drying and heating to replace their liquid components with air or another gas. These methods preserve the gel’s 3-D structure, giving it a high surface area and extremely low density. It’s like removing all the water out of Jell-O with no shrinking.

“One gram of aerogel contains about as much surface area as one football field,” said Pauzauskie.

Crane made aerogels from a gel-like polymer, a material with repeating structural units, created from formaldehyde and other carbon-based molecules. This ensured that their device, like today’s supercapacitor electrodes, would consist of carbon-rich materials.

Previously, Lim demonstrated that adding graphene — which is a sheet of carbon just one atom thick — to the gel imbued the resulting aerogel with supercapacitor properties. But, Lim and Crane needed to improve the aerogel’s performance, and make the synthesis process cheaper and easier.

In Lim’s previous experiments, adding graphene hadn’t improved the aerogel’s capacitance. So they instead loaded aerogels with thin sheets of either molybdenum disulfide or tungsten disulfide. Both chemicals are used widely today in industrial lubricants.

The researchers treated both materials with high-frequency sound waves to break them up into thin sheets and incorporated them into the carbon-rich gel matrix. They could synthesize a fully-loaded wet gel in less than two hours, while other methods would take many days.

After obtaining the dried, low-density aerogel, they combined it with adhesives and another carbon-rich material to create an industrial “dough,” which Lim could simply roll out to sheets just a few thousandths of an inch thick. They cut half-inch discs from the dough and assembled them into simple coin cell battery casings to test the material’s effectiveness as a supercapacitor electrode.

Not only were their electrodes fast, simple and easy to synthesize, but they also sported a capacitance at least 127 percent greater than the carbon-rich aerogel alone.

Lim and Crane expect that aerogels loaded with even thinner sheets of molybdenum disulfide or tungsten disulfide — theirs were about 10 to 100 atoms thick — would show an even better performance. But first, they wanted to show that loaded aerogels would be faster and cheaper to synthesize, a necessary step for industrial production. The fine-tuning comes next.

The team believes that these efforts can help advance science even outside the realm of supercapacitor electrodes. Their aerogel-suspended molybdenum disulfide might remain sufficiently stable to catalyze hydrogen production. And their method to trap materials quickly in aerogels could be applied to high capacitance batteries or catalysis.

The glass transition caught in the act

We learn in school that matter comes in three states: solid, liquid and gas. A bored and clever student (we’ve all met one) then sometimes asks whether glass is a solid or a liquid.

The student has a point. Glasses are weird “solid liquids” that are cooled so fast their atoms or molecules jammed before organizing themselves in the regular patterns of a crystalline solid. So a glass has the mechanical properties of a solid but its atoms or molecules are disorganized, like those in a liquid.

One sign of the weirdness of glass is that the transition from liquid to a glass is much fuzzier than the transition from liquid to crystalline solid. In fact, the glass transition is arbitrarily defined as the point where the glass-forming material has a viscosity of 1013 poise. (The viscosity of water at room temperature is about 0.01 poise. A thick oil might have a viscosity of about 1.0 poise.) At this point, it is too thick to flow and so meets the practical definition of a solid.

Scientists hate definitions this vague, but they’ve been stuck with this one because nobody really understood the glass transition, which frequently makes it onto lists of the top-10 unsolved problems in physics.

For the most part, scientists have been able to measure only bulk properties of glass-forming liquids, such as viscosity and specific heat, and the interpretations they came up with depended in part on the measurements they took. The glass literature is notoriously full of contradictory findings and workshops about glass are the venue for lively debate.

But in the past fifteen years, new experimental setups that scatter X-rays or neutrons off the atoms in a droplet of liquid that is held without a container (which would provoke it to crystallize) have allowed scientists at long last to measure the atomic properties of the liquid. And that is the level at which they suspect the secrets of the glass transition are hidden.

In one such study, Ken Kelton, the Arthur Holly Compton Professor in Arts & Sciences at Washington University in St. Louis, and his research team (Chris Pueblo, Washington University and Minhua Sun, Harbin Normal University, China) compared a measure of the interaction of atoms for different glass-forming liquids. Their results, published online in Nature Materials, reconcile several measures of glass formation, a sign that they are on the right track.

“We have shown that the concept of fragile and strong liquids, which was invented to explain why viscosity changes in markedly different ways as a liquid cools, actually goes much deeper than just the viscosity,” Kelton said. “It is ultimately related to the repulsion between atoms, which limits their ability to move cooperatively. This is why the distinction between fragile and strong liquids also appears in structural properties, elastic properties and dynamics. They’re all just different manifestations of that atomic interaction.”

This is the first time the connection between viscosity and atomic interactions has been demonstrated experimentally, he said. Intriguingly, his studies and work by others suggest that the glass transition begins not at the conventional glass transition temperature but rather at a temperature approximately two times higher in metallic glasses (more than two times higher in the silicate glasses, such as window glass). It is at that point, Kelton said, the atoms first begin to move cooperatively.

Drilling down to the atomic level

Kelton’s latest discoveries follow earlier investigations of a characteristic of glass-forming liquids called fragility. To most people, all glasses are fragile, but to physicists some are “strong” and others are “fragile.”

The distinction was first introduced in 1995 by Austen Angell, a professor of chemistry at Arizona State University, who felt that a new term was needed to capture dramatic differences in the way a liquid’s viscosity increases as it approaches the glass transition.

The viscosities of some liquids change gradually and smoothly as they approach this transition. But as other liquids are cooled, their viscosity changes very little at first, but then take off like a rocket as the transition temperature approaches.

At the time, Angell could only measure viscosity, but he called the first type of liquid “strong” and the second type “fragile” because he suspected a structural difference underlay the differences that he saw,

“It’s easier to explain what he meant if you think of a glass becoming a liquid rather than the other way around,” Kelton said. “Suppose a glass is heated through the glass transition temperature. If it’s a ‘strong’ system, it ‘remembers’ the structure it had as a glass–which is more ordered than in a liquid–and that tells you that the structure does not change much through the transition. In contrast, a ‘fragile’ system quickly ‘forgets’ its glass structure, which tells you that its structure changes a lot through the transition.

“People argued that the change in viscosity had to be related to the structure — through several intermediate concepts, some of which are not well defined,” Kelton added. “What we did was hop over these intermediate steps to show directly that fragility was related to structure.”

In 2014, he with members of his group published in Nature Communications the results of experiments that showed that the fragility of a glass-forming liquid is reflected in something called the structure factor, a quantity measured by scattering X-rays off a droplet of liquid that contains information about the position of the atoms in the droplet.

“It was just as Angell had suspected,” Kelton said. “The rate of atomic ordering in the liquid near the transition temperature determines whether a liquid is ‘fragile’ or ‘strong.'”

Sharp little atomic elbows

But Kelton wasn’t satisfied. Other scientists were finding correlations between the fragility of a liquid and its elastic properties and dynamics, as well as its structure. “There has to be something in common,” he thought. “What’s the one thing that could underlie all of these things?” The answer, he believed, had to be the changing attraction and repulsion between atoms as they moved closer together, which is called the atomic interaction potential.

If two atoms are well separated, Kelton explained, there is little interaction between them and the interatomic potential is nearly zero. When they get closer together, they are attracted to one another for a variety of reasons. The potential energy goes down, becoming negative (or attractive). But then as they move closer still, the cores of the atoms start to interact, repelling one another. The energy shoots way up.

“It’s that repulsive part of the potential we were seeing in our experiments,” Kelton said.

What they found when they measured the repulsive potential of 10 different metallic alloys at the Advanced Photon Source, a beamline at Argonne National Laboratory, is that “strong” liquids have steeper repulsive potentials and the slope of their repulsive potential changes more rapidly that of “fragile” ones. “What this means,” Kelton said, “is that ‘strong’ liquids order more rapidly at high temperatures than ‘fragile’ ones. That is the microscopic underpinning of Angell’s fragility.

“What’s interesting,” Kelton continued, “is that we see atoms beginning to respond cooperatively — showing awareness of one another — at temperatures approximately double the glass transition temperature and close to the melting temperature.

“That’s where the glass transition really starts,” he said. “As the liquid cools more and more, atoms move cooperatively until rafts of cooperation extend from one side of the liquid to the other and the atoms jam. But that point, the conventional glass transition, is only the end point of a continuous process that begins at a much higher temperature.”

Kelton will soon attend a workshop in Poland where he expects lively discussion of his findings, which contradict those of some of his colleagues. But he is convinced that he has hold of the thread that will lead out of the labyrinth because different levels of understanding are beginning to line up. “It’s exciting that things are coming together so well,” he said.

Empowering robots for ethical behavior

Scientists at the University of Hertfordshire in the UK have developed a concept called Empowerment to help robots to protect and serve humans, while keeping themselves safe.

Robots are becoming more common in our homes and workplaces and this looks set to continue. Many robots will have to interact with humans in unpredictable situations. For example, self-driving cars need to keep their occupants safe, while protecting the car from damage. Robots caring for the elderly will need to adapt to complex situations and respond to their owners’ needs.

Recently, thinkers such as Stephen Hawking have warned about the potential dangers of artificial intelligence, and this has sparked public discussion. “Public opinion seems to swing between enthusiasm for progress and downplaying any risks, to outright fear,” says Daniel Polani, a scientist involved in the research, which was recently published in Frontiers in Robotics and AI.

However, the concept of “intelligent” machines running amok and turning on their human creators is not new. In 1942, science fiction writer Isaac Asimov proposed his three laws of robotics, which govern how robots should interact with humans. Put simply, these laws state that a robot should not harm a human, or allow a human to be harmed. The laws also aim to ensure that robots obey orders from humans, and protect their own existence, as long as this doesn’t cause harm to a human.

The laws are well-intentioned, but they are open to misinterpretation, especially as robots don’t understand nuanced and ambiguous human language. In fact, Asimov’s stories are full of examples where robots misinterpreted the spirit of the laws, with tragic consequences.

One problem is that the concept of “harm” is complex, context-specific and is difficult to explain clearly to a robot. If a robot doesn’t understand “harm”, how can they avoid causing it? “We realized that we could use different perspectives to create ‘good’ robot behavior, broadly in keeping with Asimov’s laws,” says Christoph Salge, another scientist involved in the study.

The concept the team developed is called Empowerment. Rather than trying to make a machine understand complex ethical questions, it is based on robots always seeking to keep their options open. “Empowerment means being in a state where you have the greatest potential influence on the world you can perceive,” explains Salge. “So, for a simple robot, this might be getting safely back to its power station, and not getting stuck, which would limit its options for movement. For a more futuristic, human-like robot this would not just include movement, but could incorporate a variety of parameters, resulting in more human-like drives.”

The team mathematically coded the Empowerment concept, so that it can be adopted by a robot. While the researchers originally developed the Empowerment concept in 2005, in a recent key development, they expanded the concept so that the robot also seeks to maintain a human’s Empowerment. “We wanted the robot to see the world through the eyes of the human with which it interacts,” explains Polani. “Keeping the human safe consists of the robot acting to increase the human’s own Empowerment.”

“In a dangerous situation, the robot would try to keep the human alive and free from injury,” says Salge. “We don’t want to be oppressively protected by robots to minimize any chance of harm, we want to live in a world where robots maintain our Empowerment.”

This altruistic Empowerment concept could power robots that adhere to the spirit of Asimov’s three laws, from self-driving cars, to robot butlers. “Ultimately, I think that Empowerment might form an important part of the overall ethical behaviour of robots,” says Salge.

3-D models help scientists gauge flood impact

Heavy rainfall can cause rivers and drainage systems to overflow or dams to break, leading to flood events that bring damage to property and road systems as well potential loss of human life.

One such event in 2008 cost $10 billion in damages for the entire state of Iowa. After the flood, the Iowa Flood Center (IFC) at the University of Iowa (UI) was established as the first center in the United States for advanced flood-related research and education.

Today, simplified 2-D flood models are the state of the art for predicting flood wave propagation, or how floods spread across land. A team at IFC, led by UI Professor George Constantinescu, is creating 3-D non-hydrostatic flood models that can more accurately simulate flood wave propagation and account for the interaction between the flood wave and large obstacles such as dams or floodplain walls. These 3-D models also can be used to assess and improve the predictive capabilities of the 2-D models that government agencies and consulting companies use for predicting how floods will spread and the associated risks and hazards.

Using one of the world’s most powerful supercomputers–Titan, the 27-petaflop Cray XK7 at the Oak Ridge Leadership Computing Facility (OLCF)–Constantinescu’s team performed one of the first highly resolved, 3-D, volume-of-fluid Reynolds-averaged Navier-Stokes (RANS) simulations of a dam break in a natural environment. The simulation allowed the team to map precise water levels for actual flood events over time. RANS is a widely used method for modeling turbulent flows.

“Flood events, like those generated by dam breaks, can be computationally very expensive to simulate,” Constantinescu said. “Previously, there wasn’t enough computer power to do these kinds of time-accurate simulations in large computational domains, but with the power of high-performance computing [HPC] and Titan, we are achieving more than was previously thought possible.”

The project was supported in 2015 and 2016 within the OLCF’s Director’s Discretionary user program. The OLCF, a US Department of Energy (DOE) Office of Science User Facility located at DOE’s Oak Ridge National Laboratory, provides HPC resources for research and development projects to advance scientific discovery.

The team’s 3-D simulations showed that commonly used 2-D models may inaccurately predict some aspects of flooding, such as the time over which dangerous flood levels last at certain locations and the amount of surface area flooded. Simulation results also demonstrated that 2-D models may underestimate the speed at which floods spread and overestimate the time at which flood waves reach their highest point.

When the water sources that empty into a river rise simultaneously, they can trigger one or more successive flood waves. Accuracy of the 1-D, 2-D, or 3-D flood models that track how these waves move is crucial for predicting maximum flood depth, hazardous conditions, and other variables.

“We need to know what’s going to happen for situations in which a dam breaks,” Constantinescu said. “We need to know who’s going to be affected, how much time they will have to evacuate, and what else might happen to the environment as a result.”

Because 2-D models make simplified assumptions about some aspects of the flow, they can’t account for changes in the flow, such as when the flood wave moves around large obstacles, changes rapidly in direction, or fully immerses bridge decks. The team needed a leadership-class supercomputer to run the 3-D simulations and accurately capture these changes.

Titan Changes the Current

Using a fully non-hydrostatic 3-D RANS solver, the team performed the first simulations of the hypothetical failure of two Iowa dams: the Coralville Dam in Iowa City and the Saylorville Dam in Des Moines. Each used a computational grid of about 30-50 million cells and covered a physical area of about 20 miles by 5 miles.

The team used the state-of-the-art computational fluid dynamics software STAR-CCM+. This software features a volume-of-fluid method to track the position of the water’s free surface–the areas where water meets the air. In a scalability study, the team determined the peak performance of the code for the dam break simulations. The researchers used 2,500 of Titan’s CPU processors for peak performance in each simulation.

The researchers also computed the same dam break test cases using a standard 2-D model commonly used by IFC. When they compared the 2-D results against those of the 3-D simulations, they found that the 2-D model underestimated how quickly the flood wave moved across land and overestimated the time at which the maximum flood occurred. This finding is important because government agencies and consulting companies use 2-D shallow flow models to predict dam breaks and floods, as well as to estimate flood hazards.

“By performing these 3-D simulations, we provided a huge data set that can be used to improve the accuracy of existing 2-D and 1-D flood models,” Constantinescu said. “We can also examine the effectiveness of deploying flood protection structures for different flooding scenarios.” The team ultimately showed that HPC can be used successfully to answer engineering questions related to the consequences of structural failure of dams and related hazards.

Constantinescu said that as computers become faster and more powerful, simulations of full flooding events over larger physical regions will be possible. Summit, the OLCF’s next-generation supercomputer that is scheduled to come online in 2018, will unearth new possibilities for Constantinescu’s research.

“Advances in numerical algorithms, automatic grid generation, and increased supercomputer power will eventually make the simulations of flood waves over large durations of time possible using Titan, and even more so with Summit,” Constantinescu said. “Eventually, things we previously had to do by hand, such as generating a high-quality computational grid, will just be part of the typical software package.”