Now go for painless tattoos that can be self-administered, say Researchers

Instead of sitting in a tattoo chair for hours enduring painful punctures, imagine getting tattooed by a skin patch containing microscopic needles. Researchers at the Georgia Institute of Technology have developed low-cost, painless, and bloodless tattoos that can be self-administered and have many applications, from medical alerts to tracking neutered animals to cosmetics.

“We’ve miniaturized the needle so that it’s painless, but still effectively deposits tattoo ink in the skin,” said Mark Prausnitz, principal investigator on the paper. “This could be a way not only to make medical tattoos more accessible, but also to create new opportunities for cosmetic tattoos because of the ease of administration.”

Tattoos are used in medicine to cover up scars, guide repeated cancer radiation treatments, or restore nipples after breast surgery. Tattoos also can be used instead of bracelets as medical alerts to communicate serious medical conditions such as diabetes, epilepsy, or allergies.

Various cosmetic products using microneedles are already on the market — mostly for anti-aging — but developing microneedle technology for tattoos is new. Prausnitz, a veteran in this area, has studied microneedle patches for years to painlessly administer drugs and vaccines to the skin without the need for hypodermic needles.

tattoo

tattoo/en.wikipedia.org

“We saw this as an opportunity to leverage our work on microneedle technology to make tattoos more accessible,” Prausnitz said. “While some people are willing to accept the pain and time required for a tattoo, we thought others might prefer a tattoo that is simply pressed onto the skin and does not hurt.”

Transforming Tattooing

Tattoos typically use large needles to puncture repeatedly into the skin to get a good image, a time-consuming and painful process. The Georgia Tech team has developed microneedles that are smaller than a grain of sand and are made of tattoo ink encased in a dissolvable matrix.

“Because the microneedles are made of tattoo ink, they deposit the ink in the skin very efficiently,” said Li, the lead author of the study.

In this way, the microneedles can be pressed into the skin just once and then dissolve, leaving the ink in the skin after a few minutes without bleeding.

Tattooing Technique

Although most microneedle patches for pharmaceuticals or cosmetics have dozens or hundreds of microneedles arranged in a square or circle, microneedle patch tattoos imprint a design that can include letters, numbers, symbols, and images. By arranging the microneedles in a specific pattern, each microneedle acts like a pixel to create a tattoo image in any shape or pattern.

The researchers start with a mold containing microneedles in a pattern that forms an image. They fill the microneedles in the mold with tattoo ink and add a patch backing for convenient handling. The resulting patch is then applied to the skin for a few minutes, during which time the microneedles dissolve and release the tattoo ink. Tattoo inks of various colors can be incorporated into the microneedles, including black-light ink that can only be seen when illuminated with ultraviolet light.

Prausnitz’s lab has been researching microneedles for vaccine delivery for years and realized they could be equally applicable to tattoos. With support from the Alliance for Contraception in Cats and Dogs, Prausnitz’s team started working on tattoos to identify spayed and neutered pets, but then realized the technology could be effective for people, too.

The tattoos were also designed with privacy in mind. The researchers even created patches sensitive to environmental factors such as light or temperature changes, where the tattoo will only appear with ultraviolet light or higher temperatures. This provides patients with privacy, revealing the tattoo only when desired.

A magnified view of a microneedle patch with green tattoo ink/photo:Georgia Tech

The study showed that the tattoos could last for at least a year and are likely to be permanent, which also makes them viable cosmetic options for people who want an aesthetic tattoo without risk of infection or the pain associated with traditional tattoos. Microneedle tattoos could alternatively be loaded with temporary tattoo ink to address short-term needs in medicine and cosmetics.

Microneedle patch tattoos can also be used to encode information in the skin of animals. Rather than clipping the ear or applying an ear tag to animals to indicate sterilization status, a painless and discreet tattoo can be applied instead.

“The goal isn’t to replace all tattoos, which are often works of beauty created by tattoo artists,” Prausnitz said. “Our goal is to create new opportunities for patients, pets, and people who want a painless tattoo that can be easily administered.”

 

Cyclone Fakir to hit AP, Odisha coast today, Heavy rains to wreak Havoc

On April 24, NASA’s Aqua satellite captured a visible image of Tropical Cyclone Fakir, southeast of La Reunion Island. The image showed vertical wind shear was pushing the bulk of clouds southeast of the center of circulation.Credits: NASA/NRL

Tropical Cyclone Fakir tracked by NASA’s Aqua satellite, Heavy rains, tsunami-like waves likely on Indian coast of Andhra Pradesh and Odisha on Wednesday.

NASA’s Aqua satellite captured a visible image of Tropical Cyclone Fakir, southeast of La Reunion Island, that showed vertical wind shear affecting it in the Southern Indian Ocean.

The Joint Typhoon Warning Center or JTWC noted on Tuesday, April 24 at 11 a.m. EDT that Fakir’s center was located near 23.3 degrees south latitude and 57.5 degrees east longitude.

From the image taken at the location is approximately 162 nautical miles south of Port Louis, Mauritius, cyclone Fakir was seen moving to the south-southeast at 18 knots (20.7 mph/33.3 kph). Maximum sustained surface winds were estimated at 60 knots (69 mph /111 kph).

The Moderate Resolution Imaging Spectroradiometer or MODIS instrument aboard NASA’s Aqua satellite has captured a visible image of Fakir that showed a rapidly disintegrated system.

The image showed the cyclone elongated as the bulk of clouds and thunderstorms were being pushed to the southeast of the center, in an area of high vertical wind shear between 40 and 50 knots (46 to 57 mph/74 to 92 kph).

JTWC warned that “[Fakir] is forecast to continue deteriorating due to the severe vertical wind shear associated with the trough (elongated area of low pressure) approaching from the west and cooling sea surface temperatures along its forecast track to the southeast. The unfavorable environment will lead to dissipation by Thursday, April 26.”

The southwest Indian Ocean cyclone season that started on November 15, 2017 will last until April 30, 2018 and the major cyclone Fakir formed on Monday, April 23 near northeastern Madagascar as captured by the Global Precipitation Measurement mission or GPM core satellite looked at the storm’s rainfall rates.

On April 22, GPM showed that bands of extremely heavy rainfall were spiraling into the tropical low’s southeastern side. GPM’s radar (DPR Ku Band) showed that precipitation was falling at a rate of over 219 mm (8.6 inches) per hour in some of the strong convective storms that were moving toward Madagascar. GPM’s radar indicated that a few of the tallest intense convective storms were reaching heights of almost 16 km (9.9 miles).
Credits: NASA/JAXA, Hal Pierce

Fakir is expected to intensify as it moves toward the southeast and could be a significant tropical cyclone on Wednesday. Fakir will add woes to an already battered Madagascar by tropical cyclones Ava, Dumazile, and Eliakim.

The GPM core observatory satellite flew above the forming cyclone near northeastern Madagascar on April 22, 2018 and its Microwave Imager (GMI) and Dual Frequency Precipitation Radar (DPR) instruments revealed the locations of heavy rainfall linked with the forming Fakir cyclone.

GPM showed that bands of extremely heavy rainfall were spiraling into the southeastern side, precipitation was falling at a rate of over 219 mm (8.6 inches) per hour in some of the strong convective storms, seen moving toward Madagascar.

A 3-D view of precipitation in forming tropical cyclone Fakirwas simulated 3-D cross section generated at NASA’s Goddard Space Flight Center in Greenbelt, Maryland to show the heights of cloud tops and radar reflectivity values within the forming tropical cyclone.

GPM’s radar indicated some convective storms were reaching heights of almost 16 km (9.9 miles). On April 23, 2018 at 11 a.m. EDT, Fakir had maximum sustained winds near 40 knots (46 mph/74 kph). Fakir was centered near 6.5 degrees south latitude and 53.2 east longitude, about 313 nautical miles north-northwest of St Denis, la Reunion and seen moving southeastward to hit the Indian coast. The system is expected to peak in strength in one day, April 24.

 

 

 

Indian Origin CEO of Spike Unveils New Concorde Supersonic Jet Ahead of NASA

Reminding the shortest trans-Atlantic Concorde flights in the 1980s, a new supersonic jet that can travel from New York to London in just three hours at 1,354 mph has successfully test-flown on Saturday without any passengers by Spike Aerospace Indian origin CEO Vik Kachoria.

The prototype of S-512 Quiet Supersonic Jet can carry 18 passengers and it was test flown unmanned for the first time after a series of wind tunnel tests, said Spike Aerospace, the firm behind the new Concorde project.

Apart from Spike, NASA’s project was unveiled last month about a viable commercial supersonic jet capable of breaking the 767 mph sound barrier. The prototype was tested inside a massive wind tunnel at NASA’s Langley Research Center so far.  However, Spike has taken lead with first trans-Atlantic test successfully carried out in three hours with the design and flight controls in tact.

Vik Kachoria, President and CEO of Spike, said: “The SX-1.2 test flights were conducted in a real world situation, and provide significantly more data than wind tunnel tests done in an artificial environment.We were able to test not only handling, but also a range of other considerations.”

Spike Aerospace CEO Vik Kachoria

The test included adjustments made mid-air to its mass, balance and controls and the aircraft was piloted by engineers KrishnaKumar Malu and Mike Ridlon at a private airfield in New England in the US.

Malu said: “These test flights are providing incredibly valuable information which we can use to refine the design.I am very excited about how helpful these tests will be to our supersonic development program.”

Spike hopes to make its S-512 supersonic aircraft ready by 2021, with its first commercial flight available by 2023. The prototype can reduce the flight from London to New York by eight hours, to just 3 hours and 30 minutes.

“Flying 450 mph faster than any other civilian jet, the Spike S-512 will enable customers to do more and enjoy more out of life,” Spike said.

Here are some specs of S-512:

Spike S-512 Quiet Supersonic Jet Key Highlights:

  • Speed: Mach 1.6 (1,100mph)
  • Passengers: 12-18
  • Range: 6200nmi
  • Sonic boom less than 75 PLdB
  • Patent-pending Quiet Supersonic Flight technology
  • Innovative Multiplex Digital Cabin
  • 40% time savings for 13% additional cost

The Spike S-512’s cabin incorporates patent-pending Multiplex Digital technology offering panoramic displays through wide windows with room for up to 18 passengers and fully customizable interior configuration, good for private air travel, said the aerospace company on its website.

The spike S-512 promises the expansive, high-definition screens spanning each side of the cabin with displays showing any view one wishes, whether it’s real-time aircraft surroundings, favorite movie or a work presentation – all with a simple touch on a mobile device.

The cabin of the S-512 assures quiet and comfort with bespoke leather seating, reduced noise or higher levels of silence, higher oxygen levels and high-speed wireless Internet connectivity. It has eliminated traditional windows allowing the S-512 to offer unprecedented noise reduction for smooth, relaxing supersonic flights.